RENU™ PEI LF NAT-MP### is the custom-mesh version of the low-flow PEI powder. All properties match TDS-006 with the key variable being particle size. The low-flow characteristic is maintained across all mesh sizes and provides the same processing advantage in compression and sinter applications. Available from 20 to 170 mesh to order.
PHYSICAL PROPERTIES
Property | Value / Range |
Polymer Type | Polyetherimide (PEI) — Low Flow |
RENU™ Code | RENU™ PEI LF NAT-MP### (### = mesh) |
Available Mesh Range | 20 to 170 mesh |
Color | Amber (natural) |
Flammability | UL94 V-0 (inherent) |
THERMAL PROPERTIES
Property | Value |
Tg | 217°C (423°F) |
Continuous Use Temp | 170°C (338°F) |
MECHANICAL PROPERTIES
Property | Value (SI) | Value (Imperial) |
Tensile Strength | 105 MPa | 15,200 psi |
Flexural Strength | 150 MPa | 21,700 psi |
CHEMICAL RESISTANCE
Agent / Environment | Resistance Rating |
See TDS-006 | All chemical resistance properties identical to standard 140-mesh LF grade |
ELECTRICAL PROPERTIES
Property | Value |
See TDS-006 | All electrical properties identical to standard 140-mesh LF grade |
TYPICAL APPLICATIONS
Note: RENU™ recycled powders are suitable for non-critical industrial, electronics, automotive, and commercial applications. They are NOT recommended for safety-critical aerospace structures or life-sustaining medical devices.
Application Area | Specific Uses |
Compression Molding (Custom Geometries) | Custom particle sizing for optimized packing density in specialized mold geometries |
Thermal Spray (Low-Energy) | Coarser LF grade powders for lower-velocity spray systems |
PACKAGING & AVAILABILITY
Format | Details |
Box (Standard) | Up to 25 kg (55 lbs) per box — double-wall corrugated with poly liner |
Drum (Bulk) | 68 kg (150 lbs) bulk drums — fiber or plastic drum with sealed poly liner |
Custom Packaging | Available on request for larger volumes — contact PolyClean for details |
Labeling | Each container labeled with: RENU™ product code, mesh size, lot number, and date of manufacture |
Processing Notes Specify mesh on PO. See TDS-006 for full property data. |
DISCLAIMER The technical data contained in this document has not been produced by PolyClean Technologies through its own independent testing and measurements. This information has been assembled from publicly available data published by original polymer manufacturers and industry reference sources. PolyClean Technologies makes no warranties, expressed or implied, regarding the accuracy or completeness of this information.
Customers are solely responsible for verifying that this material is suitable for their specific application. PolyClean Technologies shall not be liable for any damages resulting from the use of this information or from the use of its products in any application. This data is intended for general guidance only.
RENU™ recycled materials are produced from post-industrial clean scrap and are appropriate for non-critical industrial, commercial, electronics, and general-purpose applications. They are not recommended or warranted for use in flight-critical aerospace structures, implantable medical devices, or other life-safety applications without thorough independent testing and qualification by the end user. |